Subscribe For Free Updates!

We'll not spam mate! We promise.

Saturday 27 September 2014

GA Questions - RBI Assistant Exam - 26 Sept-2014 (Both Shift)

GA Questions - RBI Assistant Exam - 26 Sept-2014 (Both Shift)


1. When did India become member of WTO? - 1995
2. RBI formed in which Year? - 1935
3. Any Time Milk by which company? - Amul
4. India's first Postal Savings Office ATM located in which city? - Chennai
5. First newspaper of india-bengal gazette
6. Tibor full form - Tokyo Interbank Offered Rate
7. Japan's dance - Odori and Mai
8. Current CRR - 4%
9. How much interest paid by rbi on deposit of CRR? Zero
10. Prime minister of UK - David Cameroon
11. Newly elected deputy governor - S.S. Mundra
12. Total imports done in 2013-14 ? - $616.7 billion
13. Total exports done in 2013-14 ? - $442.4 billion
14. Pound sterling is the currency of which country - United Kingdom
15. PM Modi is which PM of India? 15th PM
16. Which Lok Sabha election was held recently? - 16th
17. Netherlands Capital? - Amsterdam
18. India wins how many gold in CWG? 15
19. NASSCOM chairman? R. Chandrashekaran
20. Best film (hindi) in Nationals? - Jolly LLB
21. GDP for 2014-15 by IMF? - 5.4%
22. India's first motion picture? - Raja Harishchandra
23. India's first newspaper? - Bengal Gazette
24. One question from whole price index.
25. Total women population in the world as per census? -
26. Press council of India formed in which year? - 1978
27. Indira Awas Yojna which year formed? - 1996
28. Which of following country is not a male dominated country? - USA
29. Currency of UK ? - Pound Sterling
30. Minister of Railways ? - Sadananda Gowda
31. One question on China's development index.
32. Newly granted license for which two banks ? - IDFC and Bandhan
33. Who among the following is not a RBI deputy governors ?
34. World Heart day? - 29 September
35. Current Foreign Exchange reserve of India? - 319,390 million $ US
36. WTO head quarters? - Geneva
37. RBI proposed for 5th deputy governor by post - Chief Operating Officer
38. One question was from world bank (option given ..not part of wb)
39. One question from tag line of bank
40. Which is not nationalised bank from option
41. No question from budget
42. Shadow banking committee headed by - T. Vijay Bhaskar
43. Overhead is related which sport - Netball
44. Who is lady election commission officer? V.S. Ramadevi
45. FDI in Public sector bank? - 20%
46. Summer 2016 games held in? Rio De Janeiro
47. Which do not work under RBI ? Options were IMF, IFC, etc - Answer is IMF

SOME VERY USEFUL SHORT FORMS

   SOME VERY USEFUL SHORT FORMS   


 1.) GOOGLE : Global Organization Of Oriented Group Language Of Earth .
2.) YAHOO : Yet Another Hierarchical Officious Oracle .
3.) WINDOW : Wide Interactive Network Development for Office work Solution
4.) COMPUTER : Common Oriented Machine Particularly United and used under Technical and Educational Research.
5.) VIRUS : Vital Information Resources Under Siege .
6.) UMTS : Universal Mobile Telecommunications System .
7.) AMOLED : Active-matrix organic light-emitting diode
8.) OLED : Organic light-emitting diode
9.) IMEI: International Mobile Equipment Identity .
10.) ESN: Electronic Serial Number .
11.) UPS: uninterruptible power supply .
12. HDMI: High-Definition Multimedia Interface
13.) VPN: virtual private network
14.)APN: Access Point Name
15.) SIM: Subscriber Identity Module
16.) LED: Light emitting diode.
17.) DLNA: Digital Living Network Alliance
18.) RAM: Random access memory.
19.) ROM: Read only memory.
20.) VGA: Video Graphics Array
21.) QVGA: Quarter Video Graphics Array
22.) WVGA: Wide video graphics array.
23.) WXGA: Widescreen Extended Graphics Array
24.)USB: Universal serial Bus
25.) WLAN: Wireless Local Area Network
26.) PPI: Pixels Per Inch
27.) LCD: Liquid Crystal Display.
28.) HSDPA: High speed down-link packet access.
29.) HSUPA: High-Speed Uplink Packet Access
30.) HSPA: High Speed Packet Access
31.) GPRS: General Packet Radio Service
32.) EDGE: Enhanced Data Rates for Global Evolution
33.)NFC: Near field communication
34.) OTG: on-the-go
35.) S-LCD: Super Liquid Crystal Display
36.) O.S: Operating system.
37.) SNS: Social network service
38.) H.S: HOTSPOT
39.) P.O.I: point of interest
40.)GPS: Global Positioning System
41.)DVD: Digital Video Disk
42.)DTP: Desk top publishing.
43.) DNSE: Digital natural sound engine .
44.) OVI: Ohio Video Intranet
45.)CDMA: Code Division Multiple Access
46.) WCDMA: Wide-band Code Division Multiple Access
47.)GSM: Global System for Mobile Communications
48.)WI-FI: Wireless Fidelity
49.) DIVX: Digital internet video access.
50.) .APK: authenticated public key.
51.) J2ME: java 2 micro edition
52.) SIS: installation source.
53.) DELL: Digital electronic link library.
54.)ACER: Acquisition Collaboration Experimentation Reflection
55.)RSS: Really simple syndication
56.) TFT: thin film transistor
57.) AMR: Adaptive Multi-Rate
58.) MPEG: moving pictures experts group
59.)IVRS: Interactive Voice Response System
60.) HP: Hewlett Packard

Monday 22 September 2014

MECHANICAL ENGINEERING TERMS 2

MECHANICAL ENGINEERING TERMS:-


1.)GEAR – A wheel with teeth that engage or mesh with teeth of another wheel.

2.)GEAR BOX– A unit which has a series of gears and shafts to vary the speed of the gearbox output shaft compared to the engine speed. This in turn increases the torque and thereby improves acceleration of the vehicle.

3.)GEAR RATIO – The ratio of the number of teeth on two gears to mesh with each other.

4.)HANDLING– The ease of maneuvering a vehicle without slipping or skidding.

5.)HYDRAULIC BRAKE – A brake system using hydraulic fluid, piston and cylinders to provide extremely high pressure for brake application.

6.)HYDRAULIC CLUTCH – A clutch that uses hydraulic pressure to actuate the clutch. Used in heavy duty equipment and where the engine is away from the drivers compartment so that it would be difficult to use mechanical linkages.

7.)HYDRAULIC CONTROL VALVES – A system of valves that senses driving conditions and automatically shifts the transmission.

8.)HYPOID GEARS – Drive pinion and ring gears whose shape allows them to mesh off centre.

9.)INDEPENDENT SUSPENSION – A type of suspension system in which each wheel is independently supported by a spring. A suspension that allows up and down movement of one wheel without affecting the opposite wheel.

10.)INNER TUBE (tyre) – The inside rubber tube assembled in the tyre casing, it maintains the air at sufficient pressure to inflate the casing and adequately support the vehicle weight.

11.)FLUID FLY WHEEL– A liquid coupling used to transmit the engine effort (torque) to a clutch and transmission. This coupling is always a major part of the engine flywheel.

12.)FORWARD CONTROL TRUCK– has the engine either in or below the driver’s cabin.

 MECHANICAL ENGINEERING TERMS 1

13.)FORWARD EFFICIENCY – is the ratio of the amount of driver input torque which is available at the wheels to turn the same to the total amount of input torque from the driver at the steering wheel.

14.)FOUR WHEEL DRIVE– Some cross country vehicles (Jeeps) have this arrangement. In this case, the engine power is transmitted to all the four wheels of the vehicle. The main advantage of this arrangement is the entire vehicle weight is available for traction.

15.)FRAME – The assembly of metal structural parts and channel sections that forms the base and supports the engine and body and is supported by the vehicle wheels.

16.)EMERGENCY BRAKE– is the hand brake, operated by a lever, is used when the vehicle is left parked and prevents the vehicle from moving. The hand brake can be applied to stop the vehicle when the service brake fails.

17.)EPICYCLIC GEAR– In the epicyclic gearing, at least one gear not only rotates about its own axis, but also rotates about some other axis.

18.)FADE (brake) – A condition that occurs when there is little braking effect with full brake pedal force.

19.)FINAL DRIVE – The final gear reduction between the engine and the drive wheels.

20.)FIXED CALIPER DISC BRAKES – Disc brakes using a caliper which is fixed in position and cannot move.

MECHANICAL ENGINEERING TERMS 1

MECHANICAL ENGINEERING TERMS:-



1.)DRAGSTER – Car especially built for drag racing.

2.)DRAG WHEEL – Special steering wheel used on some dragsters. Often consists of cross bar spoke and portion of rim on each end.

3.)DRIVE LINE or DRIVE TRAIN – Propeller shaft, universal joints etc. connecting transmission output shaft to axle pinion gear shaft.


4.)DROP CENTRE RIM – Centre section of rim being lower than two outer edges. This allows bead of tyre to be pushed into lower area on one side while the other side is pulled over and off the flange.

5.)DROPPED AXLE – Front axle altered so as to lower the frame of the vehicle. Consists of bending axle downward at outer ends (solid front axle).

6.)DOUBLE LEADING BRAKE – A drumbrake assembly with both front shoes self energized during forward wheel rotation.


7.)DOUBLE REDUCTION AXLE– In the double reduction or tripple reduction type final drive, the required speed reduction is obtained in two or more steps. This enables higher torque to be available at the road wheels. In heavy duty and off highway vehicles, multiple reduction is used. 

8.)DOUBLE TRAILING BRAKE – A drum brake assembly with both shoes self energized during rearward wheel rotation only.

9.)DRAG – To accelerate a vehicle from standing start, over course one fourth mile in length. Also used by some drivers when referring to challenging another driver to an acceleration race.

10.)DRAG LINK – A steel rod connecting pitman arm to one of steering knuckles. On some installations, drag link connects pitman arm to a centre idler arm.

11.)DIFFERENTIAL LOCK– The differential lock grips one or both of the side gears to the differential case. This prevents their rotation on the pins. This enables a larger torque to be transmitted to the gripping wheel than that to the slipping wheel.


12.)DIRECT ACTING SHOCK ABSORBER – Type of shock absorber which shortens or lengthens in action. Also called telescopic shock absorber.

13.)DIRECT DRIVE – Such as high gear when crankshaft and drive shaft revolve at same speed.

14.)DOUBLE LEADING SHOE – A drum brake having two leading shoes and no trailing shoes. Each shoe has its own actuating mechanism and pivot.


15.)DOUBLE PISTON CALIPER – A hydraulic brake caliper with two pistons and provision for applying hydraulic pressure equally to both pistons. The caliper body is fixed solidly.

16.)DASH BOARD – Part of body containing driving and control instruments, switches etc.

17.)DEAD AXLE – Axle that does not rotate or deliver power but merely forms a base upon which wheels may be mounted.

18.)DEDION – Rear axle set up in which driving wheels are attached to the frame by a central pivot. Differential unit is bolted to frame and is connected to the driving wheels by drive axles.


19.)DEPENDENT SUSPENSION – Wheel connected through an axle member so that movement of one wheel moves the other wheel.

20.)DIFFERENTIAL – A mechanism between axles that permit one wheel to turn at a different speed than the other while transmitting power from the drive shaft to the wheel axles, when the vehicle is negotiating a turn.

Wednesday 17 September 2014

100 MECHANICAL ENGINEERING INTERVIEW QUESTION AND ANSWER

 100 Mechanical Engineering Interview Question and Answers http://upseexam.blogspot.com/

1. What is the difference between scavenging and
supercharging?

Ans: Scavenging is process of flushing out burnt gases
from engine cylinder by introducing fresh air in the
cylinder before exhaust stroke ends. Supercharging is
the process of supplying higher mass of air by
compressing  the  atmospheric  air.

2. What are the names given to constant temperature,
constant pressure, constant volume, constant internal
energy, constant enthalpy, and constant entropy
processes?

2. Ans: Isothermal, isochoric, isobaric, free expression,
throttling  and  adiabatic  processes  respectively.

3. In a Rankine cycle if maximum steam pressure is
increased keeping steam temperature and condenser
pressure same, what will happen to dryness fraction of
steam after expansion ?Ans: It will decrease.

4. Why entropy change for a reversible adiabatic process
is  zero?

Ans: Because there is no heat transfer in this process.

5. What are two essential conditions of perfect gas?
Ans: It satisfies equation of state and its specific heats
are  constant.

6. Enthalpy and entropy are functions of one single
parameter.  Which  is  that?

Ans:  Temperature.

100 Mechanical Engineering Interview Question and Answers http://upseexam.blogspot.com/
2
100 Mechanical Engineering Interview Question and Answers http://upseexam.blogspot.com/

7. Why rate of condensation is higher on a polished
surface  compared  to  rusty  surface?

Ans: Polished surface promotes drop wise condensation
and  does  not  wet  the  surface.

8. How much resistance is offered to heat flow by drop
wise  condensation?

Ans:  Nil

How are these questions - please do add comments and
if you like them please do share this post on
Facebook, LinkedIn, twitter and google plus.

9. What is the relationship between COP of heating and
cooling?

Ans: COP of heating is one (unity) more than COP of
cooling.

10. How much is the work done in isochoric process?

Ans:  Zero.

11. When maximum discharge is obtained in nozzle?
Ans:  At  the  critical  pressure  ratio.

1. Under what condition the work done in reciprocating
compressor  will  be  least?

Ans: It is least when compression process approaches
isothermal. For this purpose, attempts are made to cool
the  air  during  compression.

13. What is the difference between stalling and surging

100 Mechanical Engineering Interview Question and Answers http://upseexam.blogspot.com/
3
100 Mechanical Engineering Interview Question and Answers http://upseexam.blogspot.com/

in  rotary  compressions?

Ans: Stalling is a local phenomenon and it occurs when
How breaks away from the blades. Surging causes
complete breakdown of flow and as such it affects the
whole  machine.

14. Why the electric motor of a fan with backward
curved blades is never got overloaded under any
condition?

Ans: The maximum power is consumed at about 70%
of maximum flow in case ‘of fan with backward blades.
For higher flow, power consumption gets lower.

15. Why the work per kg of air flow in axial flow
compressor is less compared to centrifugal compressor
for  same  pressure  ratio?

Ans: Isentropic efficiency of axial flow compressor is
higher.

16. What is the name given to portion of thermal energy
to  be  necessarily  rejected  to  environment?

Ans:  Energy.

17.  What  is  pitting?  How  it  is  caused?

Ans: Non uniform corrosion over the entire metal
surface, but occurring only in small pits is called pitting.
It is caused by lack of uniformity in metal.

18.  What  is  caustic  embrittlement?

Ans: It is the actual physical change in metal that makes
it extremely brittle and filled with minute cracks. It
occurs particularly in the seams of riveted joints and
around  the  rivet  holes.

19. Which impurities form hard scale and which
impurities  soft  scale?

Ans: Sulphates and chlorides of lime and magnesium
form hard scale, and carbonates of lime and magnesium
form  soft  scale.

20. What is the difference between hard water and soft
water?

Ans: Hard water contains excess of scale forming
impurities and soft water contains very little or no scale
forming  substances.

FOR DOWNLOAD FULL FILE CLICK ON THE GIVEN LINK